You are hereBlogs / Thistle1040's blog / Thistle 1040 - Fairing setback...

Thistle 1040 - Fairing setback...


By Thistle1040 - Posted on 20 May 2012

While sanding the starboard side of the boat today I noticed that a section at the bow was sanding poorly and that the eopxy had not fully cured. I put it down to poor mixing. I'll have to remove the epoxy and fairing from the front two feet of the boat and redo. I hate wasting time in this way but I'd much rather discover this now than after it had been painted. What a hassle that would have been?!!!

Best Marine Epoxy

My favorite epoxy?

 

EpoxyUSA.com Progressive Basic No-Blush Epoxy

Google Search

Google

Syndicate

Syndicate content