Today we made progress but we had a setback as well. Yesterday, a batch of epoxy was mixed up without the hardener. This was used for the butt joints for three pairs of sides. When we came in the next morning, instead of finding 8 pairs of sides ready to attach to the bottoms, we had to spend half a day tearing the joints apart, cleaning off the uncured epoxy and re-gluing them. We did get all the bottoms cut out and sanded. We also started stitching the bottoms onto three boats. I estimate that we're about a half a day behind. If we can get the sides on tomorrow and the insides taped then we can tape the outsides on Friday and the boats can go home on Saturday. We may actually get these built.